General FAQ: Difference between revisions

From NEOSYS User Support Wiki
Jump to navigationJump to search
Line 58: Line 58:
===Internet Explorer and Firefox===
===Internet Explorer and Firefox===


Print Preview > Scale
Print Preview > Scale. Also [refer here]


Try out different options in Page Scaling dropdown to control where the content ges cuts off.
The continuation pages always start with the column headings.
 
Nevertheless, the continuation pages always start with the column headings.


Example in Firefox:
Example in Firefox:
Line 73: Line 71:


Chrome does not provide an option to set the Page Scaling, which makes it difficult to "control" where the page gets cut. Therefore, Chrome is not a good browser to use while printing continuation pages.
Chrome does not provide an option to set the Page Scaling, which makes it difficult to "control" where the page gets cut. Therefore, Chrome is not a good browser to use while printing continuation pages.
=== Avoiding bad page breaks ===
Fine tuning the scaling is is particularly useful when only a few lines of the footing go over onto another page.
In this case you can either slightly reduce the scaling so those lines fit on the previous page or even to slightly INCREASE the scaling so the whole of the footing appears on the last page.


==How to Add/Remove Print Headers and Footers on NEOSYS generated documents?==
==How to Add/Remove Print Headers and Footers on NEOSYS generated documents?==

Revision as of 12:10, 16 March 2016

Why doesnt NEOSYS support my XYZ browser?

People sometimes expect NEOSYS to be supported transparently on all common browsers like most consumer applications or mass market web based applications - and are disappointed when NEOSYS does not support their favourite browser. Actually many complex and specialised enterprise applications only support a limited range of browsers. This is primarily for cost and efficiency reasons related to the development of user interface software and the long term support of users environment.


What is the NEOSYS backup procedure?

Every night at a scheduled time as specified in the System Configuration File, the NEOSYS program backs-up all data and stores it onto a USB drive as a BACKUP.ZIP file, under a folder which represents the day of the week. If the folder/file already exists then it is deleted/overwritten.

The USB drive has 7 folders, each one representing a day of the week. The USB needs to be interchanged after it completes a cycle of 7 backups with another USB to store another 7 days of backup. There should be 3 USB's used in rotation. In case the USB is not interchanged on the scheduled day after completion of 7 backups, the next backup on the same USB will be deemed a failure in the backup email alert.

At the end of 3 weeks, typically a client will have backups for the last 21 days which can only be used to restore NEOSYS to any particular point in time in the past (upto 21 days).

The backup files in the USB drive are encrypted and cannot be opened or read by any other program besides NEOSYS. They can only be restored in NEOSYS maintenance mode on the server. Usually this would be done by a NEOSYS Support technician.

How can I verify that the backup has been successful?

Every night when NEOSYS has been backed-up, an automated email alert is sent to all the designated recipients indicating the success or failure of the backup.

A successful backup indicates that all files required by NEOSYS to restore to an earlier time period have been saved successfully.

The backup process carries on smoothly but it will FAIL if:

  1. There is no USB connected to the server
  2. The USB has not been replaced at the end of 7 days

How to do a manual backup?

Manual backups can be done only by NEOSYS Support and users who are authorised to perform this task.

Go to Menu > Support > Backup and click on Start Backup. Once the backup has been completed a confirmation mail is sent out to the usual list as configured in the system.

How do I migrate data from my old system to NEOSYS

If you have a manual system in place wherein all your data is on excel and word then the best way to migrate would be to start off using NEOSYS afresh. This is because information in excel and word cannot be computed into a sensible financial document like a Balance sheet.

However if you are already using another finance package or management software system, then there is a guided process of how to migrate to NEOSYS.

For Finance see Migrate Finance data from OLD system to NEOSYS

For Media and/or Jobs see Migrate Media and/or Jobs data from OLD system to NEOSYS

What type of database does NEOSYS use?

NEOSYS is a custom program with a built in database of its own. NEOSYS consists of a “front end” which is implemented entirely in DHTML/Javascript/AJAX and a “back end” which is sealed and protected to ensure integrity of all data and processes.

Any requests for interfacing another program or online service with NEOSYS needs to be sent to the support staff with specifications of desired inputs and outputs.


How to reset the password?

See How to reset the password?

How to handle printing continuation pages of NEOSYS generated documents?

While taking printouts of certain NEOSYS documents like invoice or estimate or schedule printout etc, the content might continue to the next page.

Below sections talk about how to handle the printing of continuation pages in different browsers.

Internet Explorer and Firefox

Print Preview > Scale. Also [refer here]

The continuation pages always start with the column headings.

Example in Firefox:

Ff pagescale.jpg

Chrome

The continuation pages do not start with the column headings in Chrome.

Chrome does not provide an option to set the Page Scaling, which makes it difficult to "control" where the page gets cut. Therefore, Chrome is not a good browser to use while printing continuation pages.

Avoiding bad page breaks

Fine tuning the scaling is is particularly useful when only a few lines of the footing go over onto another page.

In this case you can either slightly reduce the scaling so those lines fit on the previous page or even to slightly INCREASE the scaling so the whole of the footing appears on the last page.

How to Add/Remove Print Headers and Footers on NEOSYS generated documents?

This can be taken care of by modifying the printer page setup options in IE by clicking on FILE > Page Setup

You may choose to "Empty" the respective fields OR select the desired headers / footers from the drop down menus available on the Page Setup window.

For IE6 & IE7 Header and Footer fields may be left empty (as shown below) if you would like to remove the print header/footers :

PagesetupIE6&IE7.jpg


For IE8 & IE9 the drop down options could be set to “Empty” (as shown below) if you would like to remove the print header/footers :

PagesetupIE8.jpg

How to delete NEOSYS documents (Booking Orders, Invoices etc)?

Any document after creation cannot be deleted in NEOSYS, but you can mark it as cancelled.

To know why, see Why doesn't NEOSYS allow cancelling or amendment of Invoices after issue

For example of how to cancel a Job, see Cancelling a Job

Why is NEOSYS taking a long time to generate a report?

The amount of time required by NEOSYS to generate a report depends on:

  1. Options selected while generating the report.
  2. Total number of records selected to be displayed on the report.

Once you have selected the desired options, click on LIST and wait until the report is generated.

Server is not responding. Recover webpage? Error on Internet Explorer

If you click anywhere on the page while the report is being generated you will see a message from browser, "neosys server is not responding. Recover webpage ?"


Recoverwebpage.jpg


Please do NOT click on recover webpage button.

Please wait until the report shows up on screen

OR

Until you get an error message saying "No response in 600 seconds from the database server at ....."

In case you get the "No Response from the database server in 600 seconds" error message then you should follow the steps as mentioned in Media FAQ

What customisation can be done on the format of NEOSYS documents?

NEOSYS provides a range of customisation options for all documents generated out of the system i.e. schedule printouts, booking orders, estimates or purchase orders, financial reports. You can do either or all of these:

  1. Use any font name and/or size that appeals to you or your corporate image
  2. Use a background colour that reflects your corporate image
  3. Use a masthead or logo as the header along with address text
  4. Customise your own set of terms and conditions for the footers
  5. Customise the signatories name and designations which should appear

The core information/content (between the header and footer) of each document is generally set to a standard format which has been widely accepted in the advertising industry over many years. NEOSYS has many options when requesting documents to cater for a wide variety of output styles but, apart from these options, the essential format cannot be completely revised from scratch. This is because NEOSYS is a ready-to-use package software solution used by many companies. Maintaining some standardisation of NEOSYS across many clients facilitates better and more efficient customer service by the NEOSYS support team. It also allows ease of upgrading over time. NEOSYS generally will develop the software free of charge but not perform any major one-off customisation, and has rarely been asked to do so.

How can we export data from NEOSYS?

All NEOSYS output is in the form of HTML which can be saved or cut and pasted into Excel which should be acceptable by auditors or other software. NEOSYS can do specific formats if required.

To open NEOSYS documents in Excel, Word etc. in Internet Explorer see Open in Excel

To export Invoices in Excel format, see Export Invoices

For more information on Exporting to other Finance systems See Export to other finance systems

Does NEOSYS have any kind of documentation to learn and understand the software

NEOSYS wiki is available to users online. Users can go through the same to understand how to use, setup and troubleshoot NEOSYS.

Users can search for NEOSYS wiki on Google