Agency FAQ: Difference between revisions

From NEOSYS User Support Wiki
Jump to navigationJump to search
No edit summary
mNo edit summary
 
(28 intermediate revisions by 7 users not shown)
Line 3: Line 3:
As you already might have a management system in place for Media and/or Jobs or are doing the same word in Excel or Word, we are not going to look into migrating this information to NEOSYS as this information is outdated and will not make sense putting into a new specialized system like NEOSYS. We will allow this type of information to be stored separately in their existing structure for future reference and put all new information into NEOSYS (eg new media plans, schedules, jobs, estimates etc). i.e. if you decide to start off with NEOSYS on 1st of May, 2009; then you will do no more work in your old way and enter all new information into NEOSYS.
As you already might have a management system in place for Media and/or Jobs or are doing the same word in Excel or Word, we are not going to look into migrating this information to NEOSYS as this information is outdated and will not make sense putting into a new specialized system like NEOSYS. We will allow this type of information to be stored separately in their existing structure for future reference and put all new information into NEOSYS (eg new media plans, schedules, jobs, estimates etc). i.e. if you decide to start off with NEOSYS on 1st of May, 2009; then you will do no more work in your old way and enter all new information into NEOSYS.


==Can I customise the format of NEOSYS documents?==
==What are alias codes in NEOSYS?==


NEOSYS provides a range of customisation options for all documents generated out of the system i.e. schedule printouts, booking orders, estimates or purchase orders. You can do either or all of these:
Client and Brand, Supplier, Market, Currency, Media/Job Type and Vehicle Files have a field to enter "alias" codes which can be used to cross reference the same records in other external systems particularly when importing and exporting data.


#Use any font name and/or size that appeals to you or your corporate image
== How do I remove executives that are no longer present or required in NEOSYS? ==
#Use a background colour that reflects your corporate image
#Use a masthead or logo as the header along with address text
#Customise your own set of terms and conditions for the footers
#Customise the signatories name and designations which should appear


The table of information/content (between the header and footer) in each of the document is generally set to a standard format which is widely used in the industry for many years. As NEOSYS is a ready-to-use solution, this table cannot be easily changed and helps maintain standardisation of NEOSYS across clients to provide for better customer service from the NEOSYS support team. However NEOSYS does try to accommodate any complex customisation requests on a one-to-one basis and this could involve an additional cost implication.
Inactive executives or duplicate names for an executive can be removed from the list of executives using the Edit button in the Schedule/job file. Add a reason for being stopped and save the executives file. All the executives saved with a reason in Stopped field will not appear in the list of Executives. You can reactivate an executive i.e make it re appear in the list by removing the Stopped reason from the file for that executive as shown in the screenshot below.


== Can I resize images to use in letterhead for NEOSYS documents? ==
[[image:Executive.jpg]]


=== Why cant you resize a nice large graphic of text down to the size required? ===
== How is Client Address on invoices obtained? ==
All jpg/gif/png files lose quality if you resize them. The problem shows up most clearly in graphics of text because of all the fine lines in the characters. Many corporate logo files suffer less from the problem as long as they are simple in design, but very few are immune.


Since it is impossible to simply resize an existing file without losing quality, the only way to get the correctly sized graphic is to have it regenerated from the master image - typically stored in a Photoshop or other image designer file.
Client & Brand files are created in the Media/Jobs module and their respective Client A/c Nos are created in Finance module and assigned to the Client & Brand files.


There is no escape from this rule. Nobody and no program can simply resize an existing jpg/gif/png file and retain quality. Resizing only slightly is, if anything, even worse than resizing significantly.
The Client & Brand file is often created first, to record information about the client, whereas Client A/c No often gets assigned afterwards.


Since resizing graphics of text is not a simple matter, generally any text in headings is done in HTML text. Using image files for text is a last resort used only if the required font is unusual as is sometimes the case for non-western scripts.
The client address on invoices is obtained following these steps:


=== Why bother with getting the best quality? ===
#If agency configuration file is set to use account name and address instead of client file details,
NEOSYS clients are in the advertising business so generally then need to show that they can manage their own graphics. The more skilled eyes in the advertising and marketing departments of both NEOSYS clients and their clients will notice poor quality even if the untrained eye does not.
#*In the client and brand file for the brand used, check if a/c no. is present in the brand line. If true and if the a/c no's address file has a recorded address, then use that.
#*Else check if client a/c no. is present in the client and brand file. If true and if the a/c no's address file has a recorded address, then use that.
#*Else use the address details found in the client and brand file
#Else use the address details found in the client and brand file


NEOSYS support staff must request properly generated files and refuse to resize larger images down to size or accept poor quality resized files from client staff. The quality of the clients documents reflects on everybody including NEOSYS and client management will expect NEOSYS support to ensure that the best quality work is done and overcome any internal obstacles.
Configuration: [[Media_Configuration_File#Invoice_uses_account_name_and_address_instead_of_client_file_details| Invoice uses A/c No & Address instead of client file details]]


===What is the problem technically? ===
==How do I classify clients based on industry or parent company?==
The problem arises because jpg/gif/png graphic files are just a pattern of dots and the original graphic design program has generated some dots with shading to create an illusion of smooth strokes despite the fact that a smooth curves and diagonals cannot be represented exactly on a grid of dots. When you resize the graphic (pattern of dots) the resizing program has no idea of where the strokes of the letters are and it is totally unable to recreate, on a different grid of dots, a new set of half-shaded dots that creates the same illusion of smoothness.


''' Example of Graphic correctly GENERATED to the desired size
Client Group fields present in the Client and Brand file are used to classify clients according to industry, organisation size and/or parent company etc. You can classify clients using Client Group 1 or Client Group 2 or both or neither.


[[image:logoresize-1.jpg]]
Classifying clients using client groups is not compulsory. However, doing so, allows you to take various reports using industry-wise, or parent company wise filters.


Here is an alternative version of the above text generated to a much smaller size. As long as the graphic is regenerated from the master design and not resized, it is possible to have text quite small in graphics but still to have good quality of appearance.
Example:


[[image:logoresize-2.jpg]]
Toyota is a subsidiary of Al Futtaim that belongs to the Automotive industry. So in the Client and Brand File of Toyota, you can classify it as a member of Al Futtaim using Client Group 1 field and/or classify it as a member of Automotive group using the Client Group 2 field. It does not matter whether you classify Al Futtaim as Client Group 1 or Client Group 2 - same is the case for Automotive.


''' Example of Graphic crudely RESIZED to the desired size
[[File:toyota.jpg]]


LETS LOOK AT A GRAPHIC THAT HAS BEEN CRUDELY RESIZED
In the Client and Brand File of Al Futtaim, you can see Toyota as a subsidiary.


Here is an image that has been resized smaller from a large and lovely jpg file originally produced from Photoshop. It looks kind of ok to the untrained eye at 100% ... but not if you had a decent quality image to compare it with.
[[File:alfuttaim.jpg]]


[[image:logoresize-3.jpg]]
In the "fake" Client and Brand File called Automotive, you can see Toyota as one of the Group 2 members.  


Take a closer look -150% - not very smooth is it?
[[File:auto.jpg]]


[[image:logoresize-4.jpg]]
== How to classify suppliers into groups? ==


at 200% we clearly see that the image could be much better. The letters are lumpy and the bottoms of all the letters are clearly cut off on the 4th line. These problem are typical of what happens when you "resize" a nice large graphic down to the size you want.
If you have many suppliers that are part of a single "supplier group", then you can group these suppliers together.
By doing so, you can generate reports for the whole supplier group.
Example:
 
Pehla and E-vision are both suppliers of a large group call E-Pehla.
 
In the Supplier file of Pehla, you should enter E-Pehla as the Supplier Group. Same should be done for E-vision.
 
[[File:Pehla.jpg]]
 
Pehla and E-vision will show as subsidiaries in the Supplier File of E-Pehla.
 
[[File:Epehla.jpg]]
 
 
When taking reports, if E-Pehla is entered in the Supplier Group filter, information pertaining to ALL the suppliers in E-pehla group will be shown in the report:
 
 
[[File:sg_mediadiary.jpg|1500px]]


[[image:logoresize-5.jpg]]
lets go even closer 400% ... here we can see all kinds of grey mess even between the letters.


[[image:logoresize-6.jpg]]
If E-Pehla is entered in the Supplier filter, informaton pertaining directly to E-Pehla only will be shown:
 
 
[[File:s_mediadiary.jpg|1500px]]
 
== Why are text columns on printouts or pdfs very narrow taking up a lot of vertical space? ==
 
The problem:
 
This usually happens on printouts or on conversion to pdf. NEOSYS reports with many columns can appear quite squeezed in portrait mode using the default font and settings.
 
The cause:
 
*NEOSYS creates documents and reports in a format that is not biased to any one display or print size since what is suitable for one user is not suitable for another.


''' Closer look at the correct GENERATED image
*NEOSYS does not attempt to predict the best column widths since the nicest column widths completely depend on the amount of text in any one column entered in practice.


Now lets look at the graphic that has been properly generated to the exact size desired ... from the original master design in Photoshop.
*NEOSYS leaves the selection of column widths to the browser to auto-fit columns as best it can. This produces far better results in the vast majority of cases than could be achieved by choosing fixed column widths, but often could be better.


It has a crisp and clean look about it.
The solution:


[[image:logoresize-7.jpg]]
If the browser defaults are not satisfactory, you can fine tune the exact configuration before printing or converting to pdf as follows:


Zooming in to 200% we see that that the dots are cleverly shaded to create the illusion of smoothness. The image is blurred now that we are viewing it at 200% but that is expected.
*Choose a smaller font in your browser before printing/converting. This is easily done by doing "Alt+V, Text Size, Smaller/Larger" for Internet Explorer, "Alt+E, Preferences, Content, Fonts and colors" for Firefox, "Alt+E, Settings, Web content, Font size" for Chrome.
*Reduce the left and right margins
*Use landscape format


[[image:logoresize-8.jpg]]
==What is the difference between terms of payment and payment instructions? ==


[[image:logoresize-9.jpg]]
The terms on which the supplier and client agree to make the payment for an invoice is mentioned in terms of payment, e.g. 60 days from the date of invoice.  


at 400% the nature of shading to create illusion of smoothness is clear. It also become clearer that the shading has been generated for a specific grid of dots and resizing could not be done without reference to the original knowledge of strokes and letters to generate a new pattern of shading.
Details entered in payment instruction consist of bank account and other transactional details required for payment transaction e.g. Bank account details, SWIFT code, bank charges etc.


[[image:logoresize-10.jpg]]
[[Client_%26_Brand_File#Terms_of_Payment|Terms of payment]] and [[Client_%26_Brand_File#Payment_Instructions|payment instruction]] if setup appear in the invoice.


[[image:logoresize-11.jpg]]
Also refer to [[Setting_up_and_Configuring_NEOSYS_Generally#Configuring_Payment_Instructions| Configuring payment instructions]] and [[Setting_up_and_Configuring_NEOSYS_Generally#Specifying_Payment_Terms_on_Invoices| Specifying term of payment on Invoices ]]

Latest revision as of 11:07, 11 June 2018

Can I migrate Media and/or Jobs data from OLD system to NEOSYS?

As you already might have a management system in place for Media and/or Jobs or are doing the same word in Excel or Word, we are not going to look into migrating this information to NEOSYS as this information is outdated and will not make sense putting into a new specialized system like NEOSYS. We will allow this type of information to be stored separately in their existing structure for future reference and put all new information into NEOSYS (eg new media plans, schedules, jobs, estimates etc). i.e. if you decide to start off with NEOSYS on 1st of May, 2009; then you will do no more work in your old way and enter all new information into NEOSYS.

What are alias codes in NEOSYS?

Client and Brand, Supplier, Market, Currency, Media/Job Type and Vehicle Files have a field to enter "alias" codes which can be used to cross reference the same records in other external systems particularly when importing and exporting data.

How do I remove executives that are no longer present or required in NEOSYS?

Inactive executives or duplicate names for an executive can be removed from the list of executives using the Edit button in the Schedule/job file. Add a reason for being stopped and save the executives file. All the executives saved with a reason in Stopped field will not appear in the list of Executives. You can reactivate an executive i.e make it re appear in the list by removing the Stopped reason from the file for that executive as shown in the screenshot below.

Executive.jpg

How is Client Address on invoices obtained?

Client & Brand files are created in the Media/Jobs module and their respective Client A/c Nos are created in Finance module and assigned to the Client & Brand files.

The Client & Brand file is often created first, to record information about the client, whereas Client A/c No often gets assigned afterwards.

The client address on invoices is obtained following these steps:

  1. If agency configuration file is set to use account name and address instead of client file details,
    • In the client and brand file for the brand used, check if a/c no. is present in the brand line. If true and if the a/c no's address file has a recorded address, then use that.
    • Else check if client a/c no. is present in the client and brand file. If true and if the a/c no's address file has a recorded address, then use that.
    • Else use the address details found in the client and brand file
  2. Else use the address details found in the client and brand file

Configuration: Invoice uses A/c No & Address instead of client file details

How do I classify clients based on industry or parent company?

Client Group fields present in the Client and Brand file are used to classify clients according to industry, organisation size and/or parent company etc. You can classify clients using Client Group 1 or Client Group 2 or both or neither.

Classifying clients using client groups is not compulsory. However, doing so, allows you to take various reports using industry-wise, or parent company wise filters.

Example:

Toyota is a subsidiary of Al Futtaim that belongs to the Automotive industry. So in the Client and Brand File of Toyota, you can classify it as a member of Al Futtaim using Client Group 1 field and/or classify it as a member of Automotive group using the Client Group 2 field. It does not matter whether you classify Al Futtaim as Client Group 1 or Client Group 2 - same is the case for Automotive.

Toyota.jpg

In the Client and Brand File of Al Futtaim, you can see Toyota as a subsidiary.

Alfuttaim.jpg

In the "fake" Client and Brand File called Automotive, you can see Toyota as one of the Group 2 members.

Auto.jpg

How to classify suppliers into groups?

If you have many suppliers that are part of a single "supplier group", then you can group these suppliers together. By doing so, you can generate reports for the whole supplier group.

Example:

Pehla and E-vision are both suppliers of a large group call E-Pehla.

In the Supplier file of Pehla, you should enter E-Pehla as the Supplier Group. Same should be done for E-vision.

Pehla.jpg

Pehla and E-vision will show as subsidiaries in the Supplier File of E-Pehla.

Epehla.jpg


When taking reports, if E-Pehla is entered in the Supplier Group filter, information pertaining to ALL the suppliers in E-pehla group will be shown in the report:


Sg mediadiary.jpg


If E-Pehla is entered in the Supplier filter, informaton pertaining directly to E-Pehla only will be shown:


S mediadiary.jpg

Why are text columns on printouts or pdfs very narrow taking up a lot of vertical space?

The problem:

This usually happens on printouts or on conversion to pdf. NEOSYS reports with many columns can appear quite squeezed in portrait mode using the default font and settings.

The cause:

  • NEOSYS creates documents and reports in a format that is not biased to any one display or print size since what is suitable for one user is not suitable for another.
  • NEOSYS does not attempt to predict the best column widths since the nicest column widths completely depend on the amount of text in any one column entered in practice.
  • NEOSYS leaves the selection of column widths to the browser to auto-fit columns as best it can. This produces far better results in the vast majority of cases than could be achieved by choosing fixed column widths, but often could be better.

The solution:

If the browser defaults are not satisfactory, you can fine tune the exact configuration before printing or converting to pdf as follows:

  • Choose a smaller font in your browser before printing/converting. This is easily done by doing "Alt+V, Text Size, Smaller/Larger" for Internet Explorer, "Alt+E, Preferences, Content, Fonts and colors" for Firefox, "Alt+E, Settings, Web content, Font size" for Chrome.
  • Reduce the left and right margins
  • Use landscape format

What is the difference between terms of payment and payment instructions?

The terms on which the supplier and client agree to make the payment for an invoice is mentioned in terms of payment, e.g. 60 days from the date of invoice.

Details entered in payment instruction consist of bank account and other transactional details required for payment transaction e.g. Bank account details, SWIFT code, bank charges etc.

Terms of payment and payment instruction if setup appear in the invoice.

Also refer to Configuring payment instructions and Specifying term of payment on Invoices

Retrieved from "https://userwiki.neosys.com/index.php?title=Agency_FAQ&oldid=6755"